the blending rotation from 50&100L VME vacuum cream emulsifier machine.MTS

100L vacuum emulsifying machine for cosmetics production

GUANGZHOU LIANHE AUTOMATIC TECHNOLOGY MACHINERY CO.,LTD has been honored with the CE certificate on our VME SERIES VACUUM HOMOGENIZING EMULSIFIERS  from  ENTE CERTIFICAZIONE MACCHINE SRL in Italy ,the notified body number NR 1282,the CERTIFICATE NR T120806/GLA966

As far as lianhe homogenizing vacuum emulsifying mixer is concerned, how it works can be descripted as below:

1.During the mixing operation, the outer anchor agitator rotates clockwise slowly. With the attached Teflon blades, the materials are scraped off the vessel wall and move upwards so they won't always stick to the wall and burn.At the same time the two fixed impellers keep still and give the materials a counterforce and drive the cream downward into the high speed homogenizing and emulsifying zone. The cream goes through the holes on the paddles and increases mixing effect.Because of the two opposite forces by fixed impellers and wall scraper, the cream rolls over the vessel from top to bottom and back to top repeatedly. When the cream is completely mixed, the heat from the jacket is quickly transferred to every part through the inside wall.

2.The heart of vacuum mixer homogenizer is bottom homogenizer (emulsifier) which consists of one three-layer toothed rotor and one two-layer toothed stator. The design is different from the homogenizer in vacuum mixer homogenizers LIANHE series and is much better.The rotor is connected with homogenizing motor by a synchronous belt with the shaft ratio of 1:1.2. The ABB or Siemens motor rotates at the speed of 3000rpm and drives the rotor to rotate up to 3600rpm producing strong suction force.

3.The materials go into the rotor from top opening of the homogenizer and are cut, sheared, emulsified and homogenized through the shear gap between the rotor and stator. Then they're accelerated to jet out through the pipeline along the tangent of the rotor. The cream runs inside the external circulation pipe and goes back to mixing tank for the slow mixing or another emulsification and homogenization.

4.The above two types of slow and high forces repeat and repeat. And the cream circulates through the pipeline and is completely mixed, dispersed, emulsified and homogenized.

5.Water ring type vacuum pump (--0.097Mpa) is powerful to pull out the bubbles generated during mixing, dispersing and homogenizing. It also helps transfer the ingredients from the oil and water phase mixers to the main vacuum mixer homogenizer. The small quantity perfumes are also sucked by vacuum to avoid dust.

6.Oil hydraulic pump is used to lift the cover of main vacuum mixer homogenizer. Safety devices are equipped to guarantee that the mixing part won't start when the cover is lifted.

The 100L vacuum mixer machine mainly is applied for the fields as following:Cosmetics & Toiletries: cream, lotion, toothpaste, wax, mascara, gel
Pharmaceuticals: ointment, dental composite, syrup, injection
Food: mayonnaise, dressing, jam, butter, margarine, wasabi
Chemicals: polyester, synthetic fiber, shoe cream.For more information about Lianhe Vacuum emulsifier mixer machine with different capacities (mainly from 5L- 5000L) contact us online by yahoo Email jackdu999@yahoo.com or browse our website http://cosmeticsmachinery.blogspot.com .

cosmetics machinery blogger http://cosmeticsmachinery.blogspot.com

100L vacuum emulsifying machine from Guangzhou Lianhe Factory

GUANGZHOU LIANHE AUTOMATIC TECHNOLOGY MACHINERY CO.,LTD has been honored with the CE certificate on our VME SERIES VACUUM HOMOGENIZING EMULSIFIERS from ENTE CERTIFICAZIONE MACCHINE SRL in Italy ,the notified body number NR 1282,the CERTIFICATE NR T120806/GLA966 .

As far as lianhe homogenizing vacuum emulsifying mixer is concerned, how it works can be descripted as below:

1.During the mixing operation, the outer anchor agitator rotates clockwise slowly. With the attached Teflon blades, the materials are scraped off the vessel wall and move upwards so they won't always stick to the wall and burn.At the same time the two fixed impellers keep still and give the materials a counterforce and drive the cream downward into the high speed homogenizing and emulsifying zone. The cream goes through the holes on the paddles and increases mixing effect.Because of the two opposite forces by fixed impellers and wall scraper, the cream rolls over the vessel from top to bottom and back to top repeatedly. When the cream is completely mixed, the heat from the jacket is quickly transferred to every part through the inside wall.

2.The heart of vacuum mixer homogenizer is bottom homogenizer (emulsifier) which consists of one three-layer toothed rotor and one two-layer toothed stator. The design is different from the homogenizer in vacuum mixer homogenizers LIANHE series and is much better.The rotor is connected with homogenizing motor by a synchronous belt with the shaft ratio of 1:1.2. The ABB or Siemens motor rotates at the speed of 3000rpm and drives the rotor to rotate up to 3600rpm producing strong suction force.

3.The materials go into the rotor from top opening of the homogenizer and are cut, sheared, emulsified and homogenized through the shear gap between the rotor and stator. Then they're accelerated to jet out through the pipeline along the tangent of the rotor. The cream runs inside the external circulation pipe and goes back to mixing tank for the slow mixing or another emulsification and homogenization.

4.The above two types of slow and high forces repeat and repeat. And the cream circulates through the pipeline and is completely mixed, dispersed, emulsified and homogenized.

5.Water ring type vacuum pump (--0.097Mpa) is powerful to pull out the bubbles generated during mixing, dispersing and homogenizing. It also helps transfer the ingredients from the oil and water phase mixers to the main vacuum mixer homogenizer. The small quantity perfumes are also sucked by vacuum to avoid dust.

6.Oil hydraulic pump is used to lift the cover of main vacuum mixer homogenizer. Safety devices are equipped to guarantee that the mixing part won't start when the cover is lifted.

The 100L vacuum mixer machine mainly is applied for the fields as following:Cosmetics & Toiletries: cream, lotion, toothpaste, wax, mascara, gel Pharmaceuticals: ointment, dental composite, syrup, injection Food: mayonnaise, dressing, jam, butter, margarine, wasabi Chemicals: polyester, synthetic fiber, shoe cream.For more information about Lianhe Vacuum emulsifier mixer machine with different capacities (mainly from 5L- 5000L) contact us online by yahoo Email jackdu999@yahoo.com or browse our website http://www.cosmeticmakingmachine.com .

Tilting Homogenizing Vacuum Emulsifier Mixer Machine 100L With High Speed Homogenizer

PENGLAI AUTOMATIC TECHNOLOGY MACHINERY CO.,LTD has been honored with the CE certificate on our VME SERIES VACUUM HOMOGENIZING EMULSIFIERS  from  ENTE CERTIFICAZIONE MACCHINE SRL in Italy ,the notified body number NR 1282,the CERTIFICATE NR T120806/GLA966

As far as lianhe homogenizing vacuum emulsifying mixer is concerned, how it works can be descripted as below:

1.During the mixing operation, the outer anchor agitator rotates clockwise slowly. With the attached Teflon blades, the materials are scraped off the vessel wall and move upwards so they won't always stick to the wall and burn.At the same time the two fixed impellers keep still and give the materials a counterforce and drive the cream downward into the high speed homogenizing and emulsifying zone. The cream goes through the holes on the paddles and increases mixing effect.Because of the two opposite forces by fixed impellers and wall scraper, the cream rolls over the vessel from top to bottom and back to top repeatedly. When the cream is completely mixed, the heat from the jacket is quickly transferred to every part through the inside wall.

2.The heart of vacuum mixer homogenizer is bottom homogenizer (emulsifier) which consists of one three-layer toothed rotor and one two-layer toothed stator. The design is different from the homogenizer in vacuum mixer homogenizers PENGLAI series and is much better.The rotor is connected with homogenizing motor by a synchronous belt with the shaft ratio of 1:1.2. The ABB or Siemens motor rotates at the speed of 3000rpm and drives the rotor to rotate up to 3600rpm producing strong suction force.

3.The materials go into the rotor from top opening of the homogenizer and are cut, sheared, emulsified and homogenized through the shear gap between the rotor and stator. Then they're accelerated to jet out through the pipeline along the tangent of the rotor. The cream runs inside the external circulation pipe and goes back to mixing tank for the slow mixing or another emulsification and homogenization.

4.The above two types of slow and high forces repeat and repeat. And the cream circulates through the pipeline and is completely mixed, dispersed, emulsified and homogenized.

5.Water ring type vacuum pump (--0.097Mpa) is powerful to pull out the bubbles generated during mixing, dispersing and homogenizing. It also helps transfer the ingredients from the oil and water phase mixers to the main vacuum mixer homogenizer. The small quantity perfumes are also sucked by vacuum to avoid dust.

6.Oil hydraulic pump is used to lift the cover of main vacuum mixer homogenizer. Safety devices are equipped to guarantee that the mixing part won't start when the cover is lifted.



100L vacuum emusifier for CE application



The 100L vacuum mixer machine mainly is applied for the fields as following:Cosmetics & Toiletries: cream, lotion, toothpaste, wax, mascara, gel

Pharmaceuticals: ointment, dental composite, syrup, injection
Food: mayonnaise, dressing, jam, butter, margarine, wasabi
Chemicals: polyester, synthetic fiber, shoe cream.For more information about Lianhe Vacuum emulsifier mixer machine with different capacities (mainly from 5L- 5000L) contact us online by yahoo Email jackdu999@yahoo.com or browse our website http://www.cosmeticmakingmachine.com .

Semi Automatic Liquid Filling Machine

brand frequency converter used in the world, with imports of high-precision multi-turn potentiometer and can lock the dial,

so that stable and accurate flow control, error is smaller at negative 0.5%, less than 1.5% correct; Magnetic gear imported stainless steel (316) pump, reliable quality and long life; stainless steel chassis, sophisticated appearance; Small, easy to operate; Full function, automatic manual can be equipped with assembly line work; can be equipped with multiple filling head, commonly used models are: single pump, double pumps and four pump machine; may charge the vast types of liquid filling. Such as: pharmaceuticals, chemicals, oils, cosmetics, food and other non-granulated liquid; irrigation Charge from 10ml to 80000ml adjustable ,easy to adjust. Technical parameter

PENGLAI Manual Liquid Filler&cosmetic filling machine semi autimatic liquid lotion paste cream filling equipments

Magnetic pump filling machine is a perfect choice in the economic way for low viscosity materials like water oil perfume or other products with similiar fluidity.

• brand frequency converter used in the world, with imports of high-precision multi-turn potentiometer and can lock the dial, so that stable and accurate flow control, error is smaller at negative 0.5%, less than 1.5% correct; • Magnetic gear imported stainless steel (316) pump, reliable quality and long life; stainless steel chassis, sophisticated appearance; • Small, easy to operate; • Full function, automatic manual can be equipped with assembly line work; • can be equipped with multiple filling head, commonly used models are: single pump, double pumps and four pump machine; • may charge the vast types of liquid filling. Such as: pharmaceuticals, chemicals, oils, cosmetics, food and other non-granulated liquid; • irrigation Charge from 10ml to 80000ml adjustable ,easy to adjust.

The Semi automatic filling machine ordered by our customers from world.

project cases listed as below:

1.To UK:Festo cylinder pneumatic filling machine 500-5000ml semi automatic cream lotion filler equipment

2.To Germany:double heads liquid filling machine magnetic gear pumps semi automatic perfume juice oil filler 

3.perfume glass bottles nail polish vacuum filling machines semi auto 4 heads Machine remplissage vide

4.TO USA:spout bags filling machine double heads fully pneumatic trial run video liquid filler semi automatic 

5.To Japan:powder filling machine semi auto 1-500G PLC operation poudre semi-automatique machine de remplissage

PENGLAI INDUSTRIAL CORPORATION LIMITED

Yemen customer inspecting the trial run of Juice production blending machine

On 4TH June ,a special day ,We Lianhe Cosmetics Machinery received our yemen customer who wanted to try his order machines like

ONE STAGE WATER TREATMENT EQUIPMENT and 2T JUICE MAKING GROUP BLENDING TANKS

as well as 1000kg SEALED STORAGE TANK. After the scrupulous inspection from our customers about the ordered machineries,the quality of our manufactured machine equipments finally was approved by our customers. Below were the technic parameters about JUICE MAKING GROUP BLENDING MACHINE for our Yemen customers : Customer's requirements: (1)、Material :316L stainless steel .

(2)、Capacity :Solution volume range from 300-1000L. (3)、It can heat up the water to 80-90 degrees by Electric steam boiler. (4)、Add one centrifugal pump, to homogenize the material in re-circulation transfering,and make the cleaning more easier. (5)、Heating method:Steam heating. (6)、Install one 5 micron filter between the blending tank and storage tank. (7)、Add the weighing load cell ,Unit in "kg"with 2 decimals. STEAM BOILDER Power:36kw Boiler rated evaporating capacity:50kg/h Rated evaporation pressure :0.4-0.7Mpa Voltage:380V, Current: Max72A PMC blending reacting boiler is mainly suitable for preparation of liquid detergents(such as shampoo, mouthwash, hand wash, liquid soap and so on) .Integrating blending ,dispersing, heating and cooling ect. Functions, the reacting machine is an ideal device for liquid preparation in various factories.For more information about Lianhe Cosmetics Equipments plz feel free to contact us online by email Yahoo IM jackdu999@yahoo.com or browse our company site http://www.lianhe666.com as well as business blogspot http://www.cosmeticsmachinery.blogspot.com .

Wooden case packed Goods loading video for Singapore customers on May23rd

On may 23rd we have sucessfully loaded the goods into two 40HQ for our Singapore customers under the condition of DTD (Door to Door) international transaction. In the two40HQ Containes the whole production line about processing the toothpaste,

which is listed as follow: 1.0T water treatment system with EDI ,blending tank ,vacuum homogenizing emulsifiers,storage tanks with cleaning heater,filling machine etc. The arrival date is estimated at about 3th June if left for Singapore from Shenzhen Shekou Port smoothly at the end of May(31st May). For more information about Guangzhou Lianhe Cosmetics Machinery like the vacuum homogenizer mixers plz feel free to contact us by email jackdu999@yahoo.com or browse our company site http://www.lianhe666.com or company blog http://www.cosmeticsmachinery.blogspot.com

The trial operation on Toothpaste making machine vacuum homogenizing emulsifiers

The trial operation on Toothpaste making machine vacuum homogenizing emulsifiers have been gone smoothly.Finally our singapore sucessfully produced the toothpaste according to their own formula.It is so assured to see the sucessful experience after long hardwork from all the staff.Thanks all one !

LIANHE Series Hydraulic Vacuum Homogeneous Emulsifiers

Lianhe  series Hydraulic Vacuum Homogenizing Emulsifier combines the best features of many homogenizing emulsifier machines currently on the market.

According to feedback from many cosmetic manufactures, It becomes  one of the   products  researched and developed by Scientific research personnel from Guangzhou Lianhe Automatic Technology Machinery Co.,Ltd (Manufacture base :Guangzhou Baiyun District ) and well-known domestic specialists .The Hydraulic Vacuum homogenizing Emulsifier is made of imported 316L stainless steel, scientific homogenizing design, complete scraping blending, ensuring the materials are organic homogenized , to make your products more shining, smooth and homogeneous.

1.Features

(1) This vacuum machine is equipped with a unique sight glass. There are cleaning scrapers under the glass plate and, with a closed type light, the operator can check the status of the homogenizing.

(2) The water phase tank and oil phase tank use electric heaters in the “inner” jacket. The outside layer is for heat protection. It protects the operator from burns.

(3) The main homogenizing tank uses a scraping blender, under the centrifuge effect  , the PTFE scraper is adjacent to the wall to scrape material from the wall. A stepless speed adjustment is used. The speed of the blending can be infinitely adjusted from 0 to 80 RPM. The materials will be well homogenized regardless of the quantity of materials put into the tank. The total quantity of the materials must cover up the homogenizer. The homogenizer can be installed through the bottom of the machine.

(4) Advanced hydraulic system to make removing the material very easy also it is very convenient to clean the machine.

(4) The machine unit is composed of four components, an electronic controller, a water phase dissolving tank, an oil phase dissolving tank and the vacuum homogenizing tank.

2.operational program

(1) This Hydraulic vacuum emulsifier equipment must be cleaned and disinfected.

(2) The water tank and oil tank start to heat after putting the ingredients into the tanks. The thermometer on the controller will show the temperature of the two tanks. In order to make sure the materials are heating equally, they should be heated while blending. The blending time can be controlled by the electronic controller.

(3) When the temperature of the ingredients in the water and oil tanks reaches the set temperature, turn on the vacuum system. Once the main tank reaches 0.06 Mpa negative pressure, start to vacuum the ingredients to the main tank from the water and oil tanks. Leave 1/3 of the water in the water tank until the oil tank is empty. The 1/3 water will clean the oil in the pipe without any waste, it should be vacuumed while blending, the speed can be adjusted according to your products (speed range:5-240m/min)

(4) After the ingredients are vacuumed to the main tank, turn on the homogenizer. The time and speed ( motor speed frequency control must be installed) can be set according to the type of product. The homogenizing time is normally set from 3 to 20minutes (the speed is set by the manufacturer from 200 to 3300r/min). If there are no special requirements it is not necessary to adjust. During the homogenizing you can check the status of the homogenizing from the sight glass on the tank. After the homogenizing meets the customer specified requirements, turn off the homogenizer.

(5) When the homogenizing is finished, start to cool the product. Open the cooling water valve. The cooling system is a circulation type. It can cool while blending, the vacuum degree should be about -0.05Mpa (can be set according to product type), when the product temperature reaches approximately 50° C put the other ingredients into the tank, such as essences, preservatives, functional ingredients and so on.

(6) When the product temperature reaches room temperature, turn off the cooling water valve, release the vacuum, open the material removal valve or bump tilt the tank to remove the product.

3. Attention

(1) Every time, before turning the machine on, check the power supply.

(2)the machine can be damaged ..

(3) DO NOT turn the blender on if the water and oil tanks are empty as the machine may be damaged.

(4) During sucking the material to the main tank from the water and oil tank , the vacuum cannot be too high, normally about -0.06Mpa. This prevents the water and oil from boiling. Once the temperature goes down, the vacuum can be higher.

(5) Checking the filter regularly prevents any impurities from entering the tank which may damage the machine. .

(6) When setting the heating temperature of the water and oil tanks, the temperature should be set about 8° C lower than required.

(7) Prevent water from getting into the motor when cleaning the machine. WATER WILL DAMAGE THE MOTOR.

(8) The speed of the motor speed frequency control is set by the manufacturer, If there are no special requirements it is not necessary to adjust the motor speed,the motor can be damaged.

(9) If the vacuum pump is not used for a long period of time, check to see that the vacuum pump is not stuck.

(10) Turn on the light in the main tank only when checking the material status in order to avoid burning out the circuit.

(11) Avoid turning on the hydraulic system when the main tank is in a vacuum status.

(12) If the machine malfunctions, immediately turn off the power supply.

For more information about  Guangzhou Lianhe Series Cosmetics Machinery,you can browse our another company site http://www.lianhe666.com or our youtube video site  http://www.youtube.com/user/mrjackdu007 .

Singapore customers Inspecting the toothpaste production Chemical machinery

Singapore customers Inspecting the toothpaste production Chemical machinery

During 7th May on ward to 9th ,we Guangzhou Liane Cosmetics Machinery factory

Underwent a strict inspection from Singapore customers on our cosmetics machines such as RO water Treatment (one Stage),Blending mixers with steam regenerator ,vacuum emulsifiers and automatic filling machine for toothpast as well as the final process of labelling .

Luckily and as a matter of course from us, the inspection was processed smoothly ,feedback postive from our customers with a whole toothpaste-producing machinery system worthy about $256,000. I though felt very tired the same as my boss and other collegues,it was our great honor that we got the nod from our friends von Singaporen.Their one word in praisal worthy our three days continual(without stop from morning till evening to test the whole cosmetics machines ).
We only manufacture the cosmetics machineries Equipments with good quality because the thanks and approval from our customers is the sweet fruit for our work.

Below the machines on the toothpast chemical machinery testing run on the spot.

For more information about toothpast production line plz feel free to browse lianhe youtube business website http://www.youtube.com/user/mrjackdu007 for more video information videoed then .

1000L Stainless Steel Shampoo Blending Tank

1000L stainless steel shampoo blending tank

Use:1.The shampoo blending boiler is an indispensable device for daily chemical industry

2.It is suitable for mixing and blending various materials,for example,mixing,dissolving and blending equal mixture etc.of viscous liquid such as shampoo and bath lotion.

3.It is an deal device for daily chemical industry.

Capability&Characteristic
1.The Blending Tank system adopts single-direction or double-direction wall scraping blending and frequency conversion speed adjustment to satisfy production of different technological requirements.

2.Materials can be heated or cooled according to technological requirements.The heating method such as steam or electric heating can be selected according to customer requirements.

3.Various forms of blending vanes are suitable for production of different types of  cosmetics products.
Made of imported SUS304 or SUS316L stainless steel.The tank body and pipe are subjected to mirror polishing.

4.Bottom installation type dispersing head and LIANHE pipeline type emulsifying head are optional to speed up dissolution and emulsification of materials.

5.The stainless steel electric control cabinet can completely supervise the operation of equipment,and display such data as temperature and blending rotation speed etc.

6.During the production of liquid washing products,the self-suction type AES dissolver can alleviate worker's labor intensity of feeding and shorten dissolving time.

Parameter about Shampoo Blending Tanks

For more information about our Shampoo making machines ,plz feel free to browse our business website http://www.lianhe666.com/ or click our youtube video site for visual information http://www.youtube.com/user/mrjackdu007 .