Deodorant sticks assembly equipment fully automatic 70ppm injection molding parts assembler

Fully automatic assembly machine performance introduction

1. The frame is welded with high quality carbon steel and square pipe. Solid body, surface paint treatment, beautiful appearance.

2. Adopt double station design, assemble 4 products at a time, effectively improve production capacity.

3. Precision intermittent divider divides the turntable into multiple stations for assembly.

 4. The barrel is placed in the hopper manually, and the other four materials are fed automatically by vibrating plate.

5. The assembly of barrel, screws and platform is rotary mechanism, and the dome and Cap are assembly on comveyor belt, which is convenient for docking with customers' filling line.

6. Transmission mechanism: Taiwan AIRTAC pneumatic + HWIN precision guide rail, infrared induction, accurate positioning.

7. Control system: PLC+ touch screen, easy to use, easy to operate.

8. Defective product detection: visual detection, high precision.

9. Good and bad products are divided into two blanking structures, automatic sorting.

10. Equipped with finished product conveyor line, available manipulator automatically placed on the tray.(Optional) 

Working process of automatic assembly machine:

 

Manually place the barrel in the hopper, automatically manage the material, and
pour the other 4 parts into different vibrating plates. The manipulator puts the
screw into the fixture, the disc rotates to next station automatically, the barrel
loading, press the screw, the disc continues to rotate to next station, the
manipulator takes the platform and puts it in the screw position, and the servo
drives the screw to rotate and screw it to the specified size. The disc moves to
the detection station, visual inspection products, defective products are
automatically removed, and good products enter the next assembly stations,
install the dome and cap. After the finished product is assembled, it enters the
conveying line and can be taken to the tray by a manipulator (this process is to
be determined). 5 parts assembly completed.

Basic parameters of automatic sticks 5 parts assembler equipment:

1. Power: about 2.5kw
2. Voltage: 220v 50hz
3. Air pressure: 0.6-0.8MPa
4. Efficiency: about 80 pcs/min
5. Specification: about 2500MM long, 2200MM wide, 1500MM high (subject to the actual shipment)

Brand of main components:

PLC: Delta
Touch screen: Siemens
Switch and button: Schnieder
Sensor: Panasonic, Japan
Visual inspection：Panasonic, Japan
Linear guide rail and screw rod: Taiwan HWIN
Servo motor: Delta
Step motor: Shenzhen Leadshine
Pneumatic components: AIRTAC 

Schematic diagram of assembly machine 5 parts assembler:

Machine working video

 PENGLAI MACHINES LIMITED