toothpaste production automated line tubes filling sealing boxing heat shrink packing machinery

The toothpaste production line includes the machines like tubes filling sealing machine/ boxing machinery as well as the heat shrink packaging machinery,which should be listed as follow:
The tube filling and sealing machine should work together with the water chiller. The water is used for cool the bottom after heating and sealing it. It can make the bottom of the tube solid and beautiful.
The smooth surface of machine has no dead angle and easy for cleaning. The materials completely contact with stainless steel and comply with GMP standard.

Specification:
1. Voltage: AC220V/50HZ±10%
2. Power: main 3kw electric heating
3. Filling Capacity: 3000-4200 tubes/hour
4. Quantity Error: less than 2%
5. Compressed Air: pressure 0.6 Mpa/cm2
6. Dimension: 1650mm X 1200mm x 1200mm
7. Weight: 600kg
Boxing machine automatic
automatic paper-folding packing machine can fold products instruction or certificate and then pack it into carton with single product, realizing automatic packing. It can be used in medicine, cosmetics, adhesives automatic packing. Paper-folding, falling carton, opening carton, packing and sealing, the serial actions are continuously and steadily realized. This machine produces rapidly, has fine appearance, smooth operation, high automization.
Main features

previous machine to form production line.
Main Technical Parameters:
1.Speed: ≤100 pcs/min
2. Main motor rate: 1.5kw
3.Instruction size: 85x50-300x200
4.Carton size: 110×22×22 -220×50×45
5.Dimension size: 4290×1135×1500mm
heat shrink packing machinery PE film
products automatically shrink packaging in mass production. Delivering canbe decided to net style or roll pole style. The machine is suitable for environmental protection material and anti-environmental protection shrink film. Work process: automatically mantle, automatically cut and seal, automatically deliver, automatically shrink.
Power supply:380V50HZ
Power: 16KW
Max. packing size(mm):450*270*350mm
Loading capacity:25 KG
Speed:0-10 M/meter adjustable
Temperature:0-300 degree adjustable
Outside size of machine:3500*850*1990mm
Weight:560KG

Our Factory since 1992 has been manufacturing the cosmetic&food making and packaging machinery.In these field we have the experience rich enough to solve the questions encountered by our customers from both home and abroad.For more information about various high quality machinery like toothpaste production automated line tubes filling sealing boxing heat shrink packing machinery,please email via jackdu999@yahoo.com or browse our website http://penglaichina.com.
Follow us on twitter:http://www.twitter.com/jackdu007
Like us on facebook:http://www.facebook.com/jackdu999
Skype us by :turnanewleaf
Call us via:0086-15811882441

PENGLAI INDUSTRIAL CORPORATION LIMITED

Reverse osmosis water purifier system, Drinking Water Carbon&quarz Filtration, RO Water treatmet

Automatic Reverse osmosis water purification system, Drinking Water equipped with Carbon&quarz Filtration equipment, RO Water treatmet SYSTEM
Basic components common to all PENGLAI Reverse Osmosis water filter purifer Systems:

Cold Water Line Valve: Valve that fits onto the cold water supply line. The valve has a tube that attaches to the inlet side of the RO pre filter. This is the water source for the RO system.
Pre-Filter (s): Water from the cold water supply line enters the Reverse Osmosis Pre Filter first. There may be more than one pre-filter used in a Reverse Osmosis system. The most commonly used pre-filters are sediment filters. These are used to remove sand silt, dirt and other sediment. Additionally, carbon filters may be used to remove chlorine, which can have a negative effect on TFC (thin film composite) & TFM (thin film material) membranes. Carbon pre filters are not used if the RO system contains a CTA (cellulose tri-acetate) membrane.

Reverse Osmosis Membrane: The Reverse Osmosis Membrane is the heart of the system. The most commonly used is a spiral wound of which there are two options: the CTA (cellulose tri-acetate), which is chlorine tolerant, and the TFC/TFM (thin film composite/material), which is not chlorine tolerant.
Post filter (s): After the water leaves the RO storage tank, but before going to the RO faucet, the product water goes through the post filter (s). The post filter (s) is generally carbon (either in granular or carbon block form). Any remaining tastes and odors are removed from the product water by post filtration.
Automatic Shut Off Valve (SOV): To conserve water, the RO system has an automatic shutoff valve. When the storage tank is full (this may vary based upon the incoming water pressure) this valve stops any further water from entering the membrane, thereby stopping water production. By shutting off the flow this valve also stops water from flowing to the drain. Once water is drawn from the RO drinking water faucet, the pressure in the tank drops and the shut off valves opens, allowing water to flow to the membrane and waste-water (water containing contaminants) to flow down the drain.

Check Valve: A check valve is located in the outlet end of the RO membrane housing. The check valve prevents the backward flow or product water from the RO storage tank. A backward flow could rupture the RO membrane.
Flow Restrictor: Water flow through the RO membrane is regulated by a flow control. There are many different styles of flow controls. This device maintains the flow rate required to obtain the highest quality drinking water (based on the gallon capacity of the membrane). It also helps maintain pressure on the inlet side of the membrane. Without the flow control very little drinking water would be produced because all the incoming tap water would take the path of least resistance and simply flow down the drain line. The flow control is located in the RO drain line tubing.
Storage Tank:The standard RO storage tank holds up to 2.5 gallons of water. A bladder inside the tank keeps water pressurized in the tank when it is full.
Faucet:The RO unit uses its own faucet, which is usually installed on the kitchen sink. In areas where required by plumbing codes an air-gap faucet is generally used.
Drain line:This line runs from the outlet end of the Reverse Osmosis membrane housing to the drain. This line is used to dispose of the impurities and contaminants found in the incoming water source (tap water). The flow control is also installed in this line.

Shenzhen Penglai since 1992 has been manufacturing the cosmetic&food making and packaging machinery.In these field we have the experience rich enough to solve the questions encountered by our customers from both home and abroad.For more information about high quality machinery,please email via jackdu999@yahoo.com or browse our website www.penglaichina.com
Follow us on twitter:http://www.twitter.com/jackdu007
Like us on facebook:http://www.facebook.com/jackdu999
Skype us by :turnanewleaf
Tel:+86-158-11882441