Please ensure that model YX-SPM Series hardware articles packaging machine works under the below-mentioned environment and working conditions(more information on different kinds of packaging machinery visit site at http://penglaichina.com as well as videos hub at http://youtube.com/jackdu007):
Ø Control the use of the environment relativeØ humidity less than 95% (40 ℃ non-Gel).
Ø The use of ambient temperature 0-45 ℃.
Ø Altitude less than 1000M.
Ø Control the use of AC-DC 24V ± 10% power.
Ø DC transistor output 50V/50mA.
Ø Switch input for volume 20mA
Ø MTBF: no less than 10,000 hours.
Ø Anti: in line with the requirements of IEC-801
basic parameter of hardware packing machine (taking example of 12bowls)
Model YX-SPM012
Bowl quantity: 12pcs
Measuring range:It is determined based on the actual situation of the parts.
Length of the bag(mm):40-160
Width of the bag(mm):40-100
Measuring range:adjustable within a certain range
Manufacturing capacity(bag/minute):20-40
Sealing form:three-side sealing,four-side sealing or back-sealing
total power(W):1600 Gas consumption:20L/Min 0.75Ma
Machine size :2800*1700*1950mm
Weight:1200KG
Packing material:composite membrane,foil and hot-sealed material and etc.
Net weight(Kg):according to the requirement of the project,the normal weight is changed somtimes.
Outer dimension(mm):according to the requirement of the project,the normal weight is changed somtimes.
1) installation
Power must be connected to the former location of the machine to confirm, correct installation of electrical connections.
Eye color, external sensors installed in the correct position.
2) operation
After the start signal input, packaging and packaging machines into the operation of the state.
When the signal to stop the importation, packaging machine to stop immediately, stop at a display screen, according to the rest of the keys do not respond.
Location of the stop signal input, the cutter axis to the open position after the stop.
Fixed-point gap bag input signal, the packaging machine at a pull bag, pull bag up to move the signal cancellation.
Seal-point move signal input, in Seal packaging machine, moving at up to Seal signal cancellation.
3) Do not control the color logo
When the standard color film, color logo will be set to control the other so that the state can, through the identification of other color sensors on the bit. However, if the color in the logo is no other effective range of color enter the command will be a warning. At this point, in color expanding the scope of effective identification of other films again after the installation.
Guarantee: for all the machine, it claims one year for guarantee.(Excluded from the warranty are problems due to accidents, misuse,misapplication, storage damage,
negligence, or modification to the Equipment or its components.
ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)
Installation: after the machine arrive your factory,if you need,our technician will go to your place to install
and test the machine and also training your worker to operating the machine (The time of train depend on you worker).
The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account and you need paid for the technician USD50 per day. also you can go to our factory to do training.
After-sale service: If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible.The cost should be in your account.(as above).
PENGLAI INDUSTRIAL CORPORATION LIMITED
US agent Office
9284 talway cir Boynton beach. fL 33472
Contact: Jack Du
Cel: 0086-15811882441 0086-13077872898
Tel:0086-755-86718316
Fax: 0086-755—25417648
Email: jackdu999@yahoo.com
Skype: turnanewleaf
Website:
http://penglaimachines.com
http://youtube.com/user/penglaichina
http://youtube.com/user/mrjackdu007
http://youtube.com/user/cosmeticmachines\
ALL RIGHTS RESERVED by PENGLAI INDUSTRIAL CORPORATION LIMITED
